Меню
Корзина

SN74AVC2T45DCUR

SN74AVC2T45DCUR
SN74AVC2T45DCUR
  • Наличие: Под заказ 3-4 недели
96 ₽
В корзину

Приемопередатчик, 3 состояния, неинвертирующий, 1.2В до 3.6В, VSSOP-8.


The SN74AVC2T45DCUR is a dual-bit dual supply Bus Transceiver with configurable voltage translation and 3-state outputs. This 2-bit non-inverting bus transceiver uses two separate configurable power-supply rails. The A ports are designed to track VCCA and accepts any supply voltage from 1.2 to 3.6V. The B ports are designed to track VCCB and accept any supply voltage from 1.2 to 3.6V. This allows for universal low-voltage bidirectional translation and level-shifting between any of the 1.2/1.5/1.8/2.5/3.3V voltage nodes. The logic levels of the direction-control input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess leakage current on the internal CMOS structure.

Характеристики
SVHC (Особо Опасные Вещества)No SVHC (15-Jun-2015)
Количество Выводов8вывод(-ов)
Линия Продукции-
Максимальная Рабочая Температура85°C
Максимальное Напряжение Питания3.6В
Минимальная Рабочая Температура-40°C
Минимальное Напряжение Питания1.2В
Стиль Корпуса Микросхемы ЛогикиVSSOP
Тип Логического УстройстваПриемопередатчик, Неинвертирующий
УпаковкаЛента и Катушка/Бобина
Уровень Чувствительности к Влажности (MSL)MSL 1 - Безлимитный