STEVAL-IFP034V1

Оценочная плата, одиночный драйвер высокой стороны, на базе IPS161H, 8В до 60В, 0.5А макс..

The STEVAL-IFP034V1 from STMicroelectronics is a single high side driver based on IPS161H. The STEVAL-IFP034V1 evaluation board is designed to analyze the IPS161H device functionality. It provides galvanic isolation between the user interface and the power interface through optical isolation implemented with optocouplers OPTO1 for forward signals to the device and OPT2 for diagnostic feedback signals. IEC 61000-4-2, IEC61000-4-4 and IEC 61000-4-5 compliance is achieved by the IPS161H itself and the U1 component (the external TVS between VCC supply rail and power ground). A dedicated GUI interface helps you test IPS161H functionality. To use it, ensure the STEVAL-IFP034V1 is connected via a 30-way flat cable to a STEVAL-PCC009V2 which is connected via USB to the PC running the GUI.

• Operating voltage range 8V to 60V
• Operating current is 0.5A maximum
• Programmable cut-off delay time
• Reverse polarity protection
• Input pins compatible with VCC rails
• Green LED for channel ON/OFF status
• Red LED for common diagnostic on open load in OFF state, cut-off, thermal protection
• Microcontroller interface