
- Наличие: Под заказ 3-4 недели
Буфер / драйвер, неинвертирующий, 3 состояния, 3В до 5.5В, TSSOP-24.
The 74AC11244PW is an octal Buffer/Line Driver designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers and bus-oriented receivers and transmitters. The device can be used as two 4-bit buffers or one 8-bit buffer with active-low output-enable (OE\) inputs. When OE\ is low, the device passes non-inverted data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pull-up resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver. The 74AC11244 is characterized for operation from -40°C to 85°C.
| Характеристики | |
| SVHC (Особо Опасные Вещества) | No SVHC (15-Jun-2015) |
| Количество Выводов | 24вывод(-ов) |
| Линия Продукции | - |
| Максимальная Рабочая Температура | 85°C |
| Максимальное Напряжение Питания | 5.5В |
| Минимальная Рабочая Температура | -40°C |
| Минимальное Напряжение Питания | 3В |
| Стиль Корпуса Микросхемы Логики | TSSOP |
| Тип Логического Устройства | Буфер, Неинвертирующий |
| Упаковка | Поштучно |
| Уровень Чувствительности к Влажности (MSL) | MSL 1 - Безлимитный |