MAX809SN232T1G

Схема контроля микропроцессора, 1.2В-5.5В питание, выход сброса с активным низким.

The MAX809SN232T1G is a very low supply current microprocessor reset monitor in 3 pin SOT-23 package. This is cost effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required, the reset output is driven active within 10sec of VCC falling through the reset voltage threshold. Reset is maintained active for a timeout period which is trimmed by the factory after VCC rises above the reset threshold. It has an active-low RESET (complementary) output. This is optimized to reject fast transient glitches on the VCC line. Low supply current of 0.5A (VCC = 3.2 V) makes it suitable for battery powered applications.

• Precision VCC monitor for 1.5V, 2.5V, 3V, 3.3V and 5V supplies
• Precision monitoring voltages from 1.2V to 4.9V available in 100mV steps
• Minimum power on reset pulse width available (1ms, 20ms, 100ms and 140ms)
• RESET (complementary) output guaranteed to VCC = 1V
• Low supply current
• Compatible with hot plug applications
• VCC transient immunity
• Wide operating temperature range from -40°C to 105°C